What is the constructive difference between the bread chamber from the oven in the furnace?

There are two versions of the camp chamber brick chamber (brick core) and metal (ready oven from the store).
They differ in those where flue gases pass. In the bread chamber gases pass inside. This is an analogue of a Russian oven. The hottest gases from the furnace, and often the flame heat the chamber walls from the inside. Such heating is much faster than the oven. The disadvantages of breadpage, the fact that inside the soot and ash. It depends on the quality of firewood and the skills of the plot. Well, in most cases, they are prepared in such a cell after the oven is droplet.

Bread machine

Bread camera is not an oven, and mini Russian oven

To baking bread and cooking, any dishes are satisfied with the bread machine (the bread chamber is a particular part of the stove for baking bread several times a day). The bread chamber is a continuation of the traditions of the Russian oven - adding the function of the burning in the form of a camera for cooking. Without touching the whole oven, you can ignite the fire on the jack chamber and heat only it. Food acquires a unique fragrance haze. Such a furnace is more heatwise and significantly wins the furnace with a welding slab periodic with an oven. Hot gases pass through the oven, heating it from the inside. You can prepare in such an oven only after full combustion of firewood in the fuel cell. During the furnace, the oven passes through it smoke and fire, warming the wall, floor and overlap of the camera. And then, after the completion of the firebox, the bricks begin to gently give the heat accumulated by them (as in a Russian furnace). It is at this time that in it and it is necessary to put that you are going to bake in it (porridge, meat, pies).

Oven

Heating furnace with an oven permanent action. Hot gases do not pass through the metal oven itself, but they warm it only from the bottom or on all sides. The so-called brass chamber.
The oven made of metal may not have enough or uneven heat for baking bread. Lack of this furnace: Low ceiling of the chamber, less heat capacity of the ovens itself, relatively rapid cooling of the furnace through the stove. Warming is much longer than the brick. But if the oven is token every day, it does not have time to cool.
Pros: Such a camera is less demanding of the quality of firewood and the plot and inside is always clean.
Designed for installation in the lower part of the furnace. At the top placement works like a dryer.

If at least once try to cook in the oven (in the Russian, in the bread chamber or the heating fifth), then you can say: if I tried, I would not remember more about the oven.

Important: Before building the furnace to explain to the customer what is the difference, and it may turn out that their expectations will not correspond to reality.

If you consider yourself a good mistress, taking into account the movement of the modern industry, then you should definitely buy our heating and cooking oven with a multifunctional integrated oven. Our specialized online store will help you decide on right choices The model suitable for your cozy house, makes all the necessary calculations, will deliver and install the heating and cooking design. In addition to the main technical procedures, the company provides warranty and after-sales service. Of course, you can purchase a device at a low price due to stocks that often pass in our store.

Our company offers a large number of transcriptions used for both cooking and housing heating. For you, large numbers are furnaces, fireplaces, barbecues, oven oven, decorated in different style directions.

Today, the newest fireplace furnaces are equipped with diverse additional features, so the desired modern hostess. Thus, the combine kitchen furnace includes a compact cooking panel (stove with oven). Among other things, during the installation of the furnace, two functions of different foci are organically combined: room heating (furnace) and decoration of residential space (fireplace).

Camin Point, equipped with an oven, speaks of your beautiful taste and awareness of the latest technical introduction of industry. The bright flame of the focus is used for cooking on a cooking plate, baking fragrant pie and buns. Among other things, you can dry fruits and vegetables. The furnace-fireplace gives the resulting heat in the living space by ray energy, produces dwelling ventilation and will help in ensuring a comfortable housing microclimate. Convenient furnace oven has reliable user guarantees, it is very popular with the consumer, as it is characterized by its low cost, accessibility, compactness.

One of the most important details country house is a brass oven, because it is an indispensable thing in the cold season. Its main functions are considered: ensuring the warmth of the premises of the house and the ability to prepare a variety of dishes for dinner in a family circle and noisy parties with friends. The furnace with and a brass cabinet for a country house is actually made with your own hands. To do this, you need to know the manufacturing process and consistently execute instructions. It will also be useful to navigate in some popular models of fireplaces equipped with ovens.

Italian wood ovens with oven

Gaia Forno.

The compact and elegant brass furnace of the Gaia Forno type has a stylish appearance and is characterized by ease of operation. It is made of high-quality modern materials. Lined with ceramic plates in several color versions. The furnace has the functions of the fireplace and has an updated appearance and construction that allows you to significantly reduce fuel consumption. Due to the stylish cast iron damper, the furnace organically fits into the interior and adds to him the realization. In addition, it is equipped with three types of aircraft, as well as the survival system.

Nicoletta Forno.

The furnace of the fireplace type of the Nicoletta Forno model from the Armony series of the Italian company Nordica is posted decorative tile From majolica in several color versions. Equipped with a surge system, and also has an air flow regulator, there is an opportunity to control the hot air flow. The furnace has a glass cabinet for full cooking, as well as a glass with glass, withstanding temperatures up to 750 ° C and a side opening door.

Furnace-fireplace "Bavaria"

The fire furnace "Bavaria" has a design wood stove. The sidewalls of the housing are made of colored ceramics, and the furnace is made of heat-resistant high-strength steel. The furnace is equipped with a brass cabinet and a clean burning system that allows you to admire fire and not worry that the glass damper will burst.

Bavaria oven has an aesthetic appearance and the ability to prepare in the oven on a living fire. The design is thought out so that the chimney is located on the back side and does not spoil the impression of external view. Use such furnaces in everyday life and safely, and their efficiency is 78%.

But to operate this type of furnace, certain requirements should be followed:

• indoors where it is installed, people should not be around the clock;
• since firewood is used for its ignition, the floor should be aligned and treated with a special composition against fire.

Making the brass furnace ourselves: what do you need?

To independently make a furnace equipped with a brass cabinet, the following materials will be required:

• brick M 250 in an amount of 1200 pcs., characterized in durability and resistance to temperature differences. Thanks to its high quality, brick can withstand up to thirty seasons;
• 5 bags chimney mix 25 kg. It is needed as a binder solution for brickwork;
• 2 meter basalt fabric;
• corners of different lengths of metal;
• building tape 55 mm - approximately 10 rolls;
• kirk, Kelm, Bulgarian and diamond circle for cutting ceramics, molding with a rubber brisk.

Before starting work on a furnace with a brass closet, you should prepare space, freeing it from unnecessary things and trash, which can interfere in the process.

Since the weight of the furnace in finished video It is approximately ten tons, then for it you need to lay the foundation and survive it for about a month. Otherwise, the furnace can "stories" and all work will have to redo it.

Base and woodlover

First of all, the ends of the brick are glued by construction scotch. It will protect it from the need to clean the lamps of the mixture with finished furnace. At this stage it is important to maximize accurately right dimensions And the angles of the foundation. The lower part, that is, "under", is needed for storing wood or furnace tools.

It is necessary to make a small indent from the furnace to the wall at 12 cm - it requires fire safety. First of all, there is a laid out of "Poda", the ash bar and pondered, while the work is regulated by a long construction level.

The overlap for the woven is made using metal corners in the amount of 6 pieces. They must be positioned so that bricks calmly laid there.

Fake camera

Cut the bricks need to be grinding using a diamond coating disc for ceramics. It is better to do this process outside the house, as it is too dusty. Directly above the confusion is the construction of the air duct, and then it is necessary to build the wall for the furnace.

Then you should mix the mixture to a homogeneous state. "Under" with its upper base is superimposed on a metal corner of 50 cm. Smooth masonry can be made using a brick-laid under the outer edge.

Cast iron parts can be made with black with automotive paint, by spraying. It is necessary to maximize the air ducts as accurately and competently, so that warm air flows can move freely and hang oven evenly.

After three rows of bricks, an insulating basalt cloth should be paved, tightly pressed it with bricks. Hiding the metal corners inward, you can begin to raise the next two rows of the furnace, thus preparing the base under the cast-iron slab with a brass cabinet. Next, it is necessary to align the place for the stove with the solution of the mixture.

Oven

The oven with the roast cabinet is an indispensable assistant in the kitchen, allowing you to bake a variety of dishes in the oven. For comfortable observation, the process provides transparent heat-resistant glass. After the base of the furnace and the furnace is erected, the laying of the brazier begins.

Metal corner, design in the form of the letter "g" is stacked around the perimeter of the plate. On the welded metal column weld on top of the vertical stand. Next, it is necessary to lay out bricks in five rows, to the left, placing the base of the oven, and on the right - to bring the air ducts and make triennik. For the most safe use The ovens need to create a deaf wall above the heat chamber. This will additionally give strength and reliability.

Association of chimneys and the creation of a pipe

To combine three air ducts must be postponed brick masonry In four rows. This is the most acceptable height for a secure association. The view is installed in the vertical position. It will avoid a strong soot when operating, even for several seasons. And it is much easier to install it in this position.

The pipe is laid in a couple of stages: on the second floor and on the roof. The masonry occurs in a circle using a two-time circuit. The pipe must be laid strictly vertically. After the work is completed, the first furnace should happen not earlier than in two weeks.

Since the furnace has a rather complicated form, which can lose its appearance over time, the construction corners are needed for a stronger design. They are used to lay a rows above the pensions, damper and a brass cabinet.

For fire safety You can lay out the floor in front of the stove tiled or put iron sheet. This will avoid fire because of the accidentally fallen coal, and the pipe at the point of contact with the ceiling and the roof is necessary to isolate.

Independent manufacture of a furnace with a brass cabinet is a completely saturated task. For its implementation you need to stock required materials, tools, as well as know a consistent action plan and clearly follow the instructions. After that, you can enjoy qualitatively performed work and comfortably spend the time at home in any weather.