• Tools for mounting

In the design of interiors, such material is used for a long time as polyurethane. Easy, but at the same time, durable modern polymeric material based on low-cost polyesters (polyol, isocyanate) is made from crude oil since 1957 in the United States.

Polyurethane eaves lightweight, durable, and in terms of quality material is not inferior to natural (heavy) cornily

In the finishing, repair work, it is often used by products from polyurethane, rosettes for chandeliers, baguette ceiling (galler). A diverse selection of decor will help embody any interior solution or design. IN lately Release cornices with a painted face. The ease of installation allows you to mount the decor anywhere indoors: under the ceiling, around the doorway, on the walls in the form of a column or framing the arches. Professional installation of polyurethane eaves will produce in the shortest possible time, and the quality of the material will not give way to natural (heavy) eaves.

Preliminary preparation for installation

Let's tell you more about the installation itself. Warming work with plasterboard or plastering and past the wall in the room, you can begin to install the decor, not forgetting the primer of seating (corners, arches or openings). Printing the packaging, check the batch number of the product and serial number on each cornice. They must coincide.

Wipe the seats with a wet sponge and give it to dry. Sale and dents eliminate, cut off superfluous or underpass. Baguettes or eaves with a width of more than 50 mm primer from the back and give drying the primer. After 5-6 hours, the material is ready for operation.

The walls should be dry, high-qualityly overloaded and well aligned in the field of decor adjacent. To check the walls and ceilings, use the level or rule. After performing simple manipulations, the above, you will be ready for the installation of the product, to the installation.

Back to the category

Tools for mounting

In some cases, a double fastening of eaves or decor elements, applying glue and screws for additional fixation. Of course, it will be necessary to drill holes at a distance of 20-30 cm from each other along the entire length of the workpiece, and under the hats to deepen with the zenkovka. Many tools do not need here. For installation you need:

• stuslo, pencil, level, cord for beating;
• hoven for metal or with small teeth, a luggage knife, replaceable blades for it;
• small hammer, small nails, drill and zenker of the desired diameters;
• small sandpaper, spatula in width of 30 mm;
• a gun for glue, a tape measure and a screwdriver with a nozzle for a double fastening system.

Here is such a simple list of tools for mounting stucco or cornizes you will need. Heavy Correspondures 200 mm Width or Decor Around door openings And the fireplaces are also screwed into a dowelle, then you will need a perforator with suitable boots in diameter. Usually used borants up to 5 mm.

The possibility of mounting the eaves in a tandem with beautiful lighting (LED ribbon, cord) displays such a material to a new level of quality.

Back to the category

Marking and installation: nuances and features

Prepare the abilities better along the whole wall for the convenience of moving and editing.

Install the baguette to the mount place, one pre-single workpiece (cornice). Put a pencil label from below. Take it on the other side of the wall. Compare the ceiling departure distance to the roulette, clear and check again.

Put the mounting line on the wall, remove with a dry sponge of the blue sink. Applying the stubble, cut the edge of the cornice with a saw or hand-hacking for metal (usually trimming under 45 degrees). The second angle is cleaned, as the first only in mirror reflection. Follow and cut the blanks between the first and last. Apply the glue with a small zigzag using a gun tightly press the blank into the angle exactly along the markup line. Fix with small carnations eaves along the entire length of the wall in a step of 30-40 cm.

Excess glue should be removed with a spatula and wipe the lines of the joints with a damp sponge (the dry acrylic glue is not easy to remove). Each joint between the eaves necessarily wake acrylic glue. It is important to remember that before buying glue, always consult on the blasting of polyurethane.

After conducting installation work on the entire perimeter, leave to dry our works for a day. After this time, remove the remnants of glue with a knife and a spatula, pass the emery junction paper. In places of weak filling with glue or formation of slots between the wall and polyurethane eaves, pass the acrylic putty (glue).

After completely drying the joints and the adjoins of the border of the eaves with a soft brush. Usually for this take paint with a white base.

The main work in painting such products is best carried out with the help of a compressor and a pulverizer to get a smooth and beautiful surface.

When installing ready-made polyurethane products, such as flames of timber, marble decor and wood, granite or stone use transparent materials and glue, and primers.

Showcase Okna Body.

Of course, the plinth cannot be called the main element of the finish, but incorrectly selected shape, ceiling or outdoor framing are able to spoil all the impression of the interior of the apartment.

Among the variety, polyurethane plinths occupy a special place, which are characterized by simplicity of installation, attractive design and availability.

Below we will talk about what to pay attention to when choosing these products and.

Polyurethane plinth - quality for reasonable money

Wide eaves can be made up of several narrow with different profiles.

The basis for the production of polyurethane plinth - outdoor or ceiling is polyurethane foam, which is also called "foamed plastic". Polyurethane foam plinths have a number of advantages that distinguish them from alternatives:

• The high strength of the material protects products from the appearance of cracks, chips and other deformations. In this regard, the widespread use was obtained by a plinth floor from polyurethane, which is not deformed from shocks.
• Ecology. Polyurethane is absolutely safe for humans and does not highlight harmful substancesTherefore, such moldings can be used in any premises, including children's rooms.
• Polyurethane is resistant to moisture and temperature drops and can be used in bathrooms, kitchens, etc.
• Installation of polyurethane plinths is simple enough and does not take much time. The material is easily cut, and the mounting to the surface is carried out on a special glue.
• The flexibility of polyurethane plinths allows them to be installed on curvilinear surfaces, and the elasticity of the material will provide a dense adjacent even to uneven walls and ceiling.
• A large selection of colors in which polyurethane moldings are produced will allow you to successfully add any interior.
• Products can be using water-based paint, although the eaves manufactured in the base white color do not need additional processing and do not lose their qualities over time.

Plinth floor polyurethane flexible allows you to experiment with interior design

Right installed plinths From polyurethane will serve not one year, but it is worth noting that:

• Products have a fairly large weight. Plinth ceiling polyurethane is desirable to fix it to the wall, and to the ceiling so that with the time the design has not saved. Therefore, it is not recommended to use such a trim for stretch ceilings.
• For installation requires a certain skill, since it should be carried out at an angle.
• The cost of material is low, but ceiling plinth Polyurethane is much more expensive than foam or plastic.

Plinth ceiling polyurethane, photo below, you need to dock at an angle of 45 degrees. It is desirable to use a stubble and a stationery knife / handcraft for metal.

Baguette should be cut carefully so as not to damage the edges

Tip: Do not cut all the details at once. After mounting the first plinth, it is better to first try on it the second and only after that cut it.

Surface preparation

Before installing Moldings, it is advisable to try on the ceiling, leaving the pencil mark in the places of adjustment, internal and external corners.

Before you start cutting, the peller needs to be correctly located on the stouch

Plot walls and ceiling should be cleaned and coated with penetrating primer - it will provide better plinning glitter with surfaces.

Installation

The installation of the ceiling plinth should be started with the corners, since these sections are the most complex.

With the spatula, the composition is best used to use the finish putty, it is neatly applied to the edges of the plinth (when installed under stretch ceilings or backlit systems - only on a part adjacent to the wall).

Applying spacure

The cornice is neatly attached to the junction between the wall and the ceiling (it is necessary to withstand an indent from the ceiling by about 20 cm) and tightly pressed. Excess putty should be removed (it is better to use a rubber spatula for this), simultaneously closeing her gaps and gaps, if any. After that, wipe the plinth with a wet sponge.

Putty fill all irregularities

Repeat similarly for each next bar.

The joints between adjacent elements are also filled with putty. After drying the composition, it is desirable to miss all defects with putty.

Before painting polyurethane plinth, it should be seized

Tip: If the plinth is attached only to the wall, then for reliability it is possible to use small finish nails without hats, traces from which put off putty.

Before, all irregularities need to be cleaned with the skin "zero" and primed.

Plinth ceiling polyurethane - Installation (video):

Painting

This module method implies the subsequent painting of the eaves together with the ceiling, although the paint can be used to paint the plinth.

As a tool, it is better to use a brush brush with a soft bristle

For painting polyurethane foam plinths, any water-based paint is suitable: acrylic, latex. You can use water paint from the canister. Application It is advisable to perform in two layers (the 1st layer should dry completely) so that the place of the joints and putty do not break through the paint.

Tip: Polyurethane can dissolve under the action of aggressive solvents, so before starting to paint, make sure there are no paints of nitro and alkyd compounds.

Paint is desirable to choose moisture-resistant or washing, since the plinth, especially with a bulk ornament, will accumulate dust and, accordingly, need wet cleaning.

Partially you can decorate the individual elements of the ornament of contrast paint; grind, artificially making a product; Apply gold, silver or bronze paint to drawing, etc.

Decorating Plinth

Tip: When mounting on the glue of the plinth, it is better to paint before mounting, so as not to be staining the walls of the walls and the ceiling, but in this case, it is better after installing the joints of the junctions to scroll additionally - so they will be less noticeable.

Installation of outdoor plinth

As a rule, after finishing walls, in this case, it is not necessary to align and rejuvenate.

And are carried out similarly to the above-described method.

An adhesive composition is applied to the opposite side of the prepared plinth with an assembly pistol. It may be acrylic sealant, "liquid nails" or special glue for polyurethane plinths. Depending on the width of the plank, the glue is applied either by zigzag or 2-3 continuous stripes along the entire length.

After applying glue, the plinth should be pressed against the wall, holding it for a while to set. Excess glue are cleaned with a wet sponge. If the gaps are formed during installation, they should be seen by acrylic sealant.

Action repeat for each segment, in parallel, applying glue on the corner element on one side.

Polyurethane plinths are well suited to almost anyone

Read more about all installation methods on video:

• Walls, ceiling and items themselves should be dry and clean.
• Fix products are necessary on aligned walls.
• It is recommended to paint the walls and ceilings, as well as wallpaper pasting after mounting products.
• It is necessary to calculate the amount of material, considering the losses arising when cutting the corners. One angle - 10 cm. It is also necessary to take into account the repetition of the pattern.

Required tools

• sawing Box - Stuslo
• saw or fine-grained hacksaw
• roulette (minimum 3 m)
• docking glue for combining products
• mounting glue for attaching products to walls and ceiling
• adhesive
• fine-grained skin (for removing glue after hardening)
• perforator and screws in the case of concrete wall, or hammer and nails (for better fixing products)

Installation

1. Previously, it is necessary to mark the wall markup using molding or cornice.

2. To join the concrete wall, drill the product under the self-tapping screw. For cornices or moldings are enough two holes. Making preliminary marking with the help of the product, mark also on the wall of the place under the dowel, using the holes in the product. This is done in order to further fix the product on the wall and prevent slipping at the time of drying the glue (24 hours).

3. Mark on the cornices or moldings of the slice location, for connecting the corners.

4. Using the stub, make the desired cuts for angular joints.

5. Apply the mounting glue from the reverse side of the product around the edges that will come into contact with the wall and the ceiling. Uniformly distribute over the entire length with a spatula.

6. Apply the product to the wall and stick it, slightly pressed. Fix with screws. Remove the excess glue using a spatula. Self-tapping screws must be screwed, slightly drowned them into the product itself, and after drying the glue (after 24 hours), to shap the holes.

7. Products can be painted a day after the installation of any paint that does not contain acetone. It is recommended to pre-cry the locations of the joints.

8. Another option to connect to the concrete twisted wall after gluing implies the use of small finishing nails, which are driven by the product, preventing it from slipping. They are driven into the plaster, and, after drying the glue, take out and shaply these places.

9. For any other walls, you can use nails, without scoring them to the end in the product, so that after drying the glue, break the caps and sharpen these places with a putty.

Docking

1. Apply special adhesive for joints on one of the surfaces with excess, filling the entire sequence plane.

2. Dinet with the already installed eaves or molding, squeezing excess glue, pulling the products to each other. For a more durable connection, lock the place of the joint with the furniture stapler.

3. After completely drying the docking glue (for a time for the package), pull out the brackets, remove the excess glue, cutting them with a knife, and pass the surface with fine-grained skin.

Polyurethane foam plinths can be used both for flooring and ceiling. Planks from this material are great for the design of almost any interior.

What advantages has a similar decor, and what is the shortcomings? Should I draw up an apartment with polyurethane plinth? And if it is worth, then what features is different to install it on the floor and on the ceiling?

Let's figure it out in more detail. For a start, let's see what characteristics have such strips.

Advantages and disadvantages of polyurethane plinth

The main advantage of this decor is its flexibility. It can be just an ideal option for decoring apartments, whose walls are characterized by a complex configuration - have rounded corners, niches and arches. Of course, it will be nice to look at smooth surfaces. Hown to look like apartments, described using such slats, see photo:

Pros and cons ceiling polyurethane plinths

Plinth ceiling polyurethane is distinguished by a number of undeniable advantages:

1. Wealth colors and textures. In addition, it can be used to design a room both wide and a narrow decor;
2. Easy in care. In case of contamination, such strips, unlike foam places, can be simply washed with a solution of any household detergent;
3. Environmental purity. If desired, such a ceiling plinth can be labeled even in nursery. Polyurethane foam is a foamed plastic. In fact, it is the same porolon, only hard and flexible;
4. Stability to deformities. Use such a decor in contrast to the same tree can be even in the bathrooms.

Polyurethane planks can imitate stucco

The ceiling plinth of polyurethane has only one, but a significant disadvantage is a big weight. Fontoam strips, for example, mounted much easier.

Important: Polyurethane foam plinths should be fixed only on special glue. Otherwise, they will soon simply come out of the walls and will be saved.

Outdoor plinth

Plinth floor from polyurethane has all the advantages of the ceiling. In addition, it is also possible to note its advantage as mechanical strength. In case of accidental strike, it does not form scratches, like on a wooden or hole, like on plastic.

Outdoor polyurethane plinth looks very carefully and is characterized by mechanical strength.

Being used for both the floor and the ceiling, due to its elasticity and flexibility, polyurethane planks are perfectly hiding all the flaws of the walls of the walls.

In addition to the weight of the minus of this type of decor, both outdoor and ceiling is also considered quite a high cost. The price of it is comparable to a tree price. However, such a framing floor look no worse:

Installation of ceiling polyurethane plinth

Now let's see what technology polyurethane plinths on the ceiling are mounted. Installing them is performed in several stages.

Selection of glue for planks

To install elements from polyurethane, you can use the "Moment installation" glue Superxile or any other similar liquid nails. Also, the planks are fixed with glue intended for tile. However, the best solution will be a special glue for polyurethane plinths. At the same time, for the urban apartment, you need to choose the option designed to stick to the planks from this material on the concrete.

Polyurethane elements are pasted on special glue

To cross the ends between the straps, use special adhesive for jacks. After applying it, the melting effect occurs. As a result, during the shrinkage of the elements, the joints do not differ in the future.

Surface preparation

The surface of the ceiling and walls must first be carefully cleaned from dirt and dust. It is very important to remove all fat stains.

Walls and ceiling must be deguted before gluing the ceiling polyurethane plinth. Photo cleaning surface

Tip: Degreasing can be made with a solution of some alkali household detergent. Of course, before installing, you should wait for a complete drying of the case.

How to glue polyurethane planks

Mount plinth ceiling polyurethane as follows:

1. The bar is launched by glue from the other side, which it will lay down to the surface of the walls and the ceiling;
2. Next, it should be tightly pressing it to the surface and hold so few;
3. After that, it is broken and waited for about one minute;
4. Next, it is pressed again to the ceiling and the wall and keep in the desired position also a minute.

Polyurethane ceiling plinth. Stock Foto Tight pressed plank

1. The jokes and cracks between the ceiling and straps are putting off. You can use acrylic sealant for this purpose.

The gaps between can be smeared with a putty or acrylic sealant

Tip: On the curved surface of the plank so that they do not break off, you can temporarily fix with small cloves. After setting the glue, they are pulled out by passage.

In this way, you can safely attach the ceiling polyurethane plinth. Installation (video shows a step-by-step process) it is on glue - a matter that requires a well-known proportion of accuracy.

Installation mechanical method

Sometimes polyurethane plinths are attached to the ceiling and walls with a mechanical way. In this case, the angular elements are primarily mounted. Next on the wall with self-draws in a step of 30-50cm, a mounting bar is installed, which is included in the kit. At the final stage, the plinth is simply snapped on the elements of the plank.

Polyurethane plinth can be installed on special planks

On a note: Polyurethane elements are best fixed on stretch ceilings. First, from fluctuations in the canvas with drafts, fixed on the glue, can get over and move away. Secondly, due to the effects of adhesive composition on the canvas, wrinkles are often formed.

Corner decoration

Without the use of special elements in the corners, the ceiling plinth of polyurethane is fixed, pre-cutting off the ends of the plane at an angle of 45gr. For this, it is used stousry. In both cases (when installing on glue and self-tapping screws), the ends of two angular slats must be sampled. It is best to make it even before installing the plinth in place. It is worth using glue, designed for joints of polyurethane planks. It holds very well, and therefore the angle of two planks will not fall apart. How to cut the planks? Most often for this is used the usual stationery knife.

Cut the polyurethane plinth using stusl

Installation of floor plinth of polyurethane

Next, consider how to attach a polyurethane plinth floor. It is also mounted for special glue. Mix decorative plinths should be started from the angle of the room. Work is carried out in several stages:

1. Preparation of the surface of the walls and floor under the plinth. They need to be carefully cleaned and degrease;
2. The bar is missing with glue from the reverse side. There are special grooves (shelves). The composition must be applied on them, as well as on the ends;

Glue is applied on the reverse side

1. Outdoor plinth is tightly pressed against the wall and is held as a few minutes. You can press it to the wall with something heavy;
2. The junctions between the straps are treated with acrylic sealant.

Tip: In the locations of the walls of the walls, the Polyurethane Polyuretne Floor can be slightly left. In order for it to stick along the entire surface evenly, it needs to be simply navigating the cloves. After the glue is grabbed, they can be pulled out. It is necessary to grab nails of the bar and on the corners.

Very spectacular in the interior looks Plinth Outdoor polyurethane wide. Glue it according to the same technology. However, since it can give quite a significant shrinkage, the joints between such high straps sometimes somewhat diverge. In this case, it is necessary to wait for the stopping of the gap, that is, a complete shrinkage of the plinth. After that, the old glue will need to be removed. Next, the separated seam is filled with junction with a syringe. Since it forms a foam, it should be followed that when applying it does not reach the surface for about 2mm.

Wide floor polyurethane plinth looks very effectively, but somewhat complicated in the installation

Polyurethane plinth can be mounted and mechanically in the self-tapping screw. On the video below, this process is shown step by step:

Coloring plinth

White plinth is often intended for painting. You can begin to stain in the day after the sticker. What to paint polyurethane plinth? For the ceiling option, water paint is usually used. For outdoor - acrylic or latex, since in this case the surface can be turned on next.

For dyeing outdoor polyurethane plinth, you can use an acrylic dye

Important: Cannot be used for dyes designed for external work. They can freeze the surface of the planks.

How to paint polyurethane plinths we found out. Now let's see how best to do it. Usually painting the plinth is performed before its sticking. However, it is possible to paint it after installation. At the same time, the walls and the ceiling along the slats are punctured by painting scotch. Staining is performed in two layers. In this case, you can use both a brush and a pulverizer.

Paint is applied as a pulverizer and brush

As you can see, the baseboard floor polyurethane flexible can be installed and painted with independently, just as the ceiling. The main thing to ensure that it does not move away from the surface.