The mandatory attributes of any city in the post-Soviet space are old good panel houses that have left the era of the development of the 70s. The construction of such houses was carried out on the principle of the designer: the finished panels were brought to the construction site, and the future residential building was "going". Details of such a designer were made at special plants - house-building combines.

The main difference of such construction technology from the rest is a standard layout that implies the same number of areas, identical location of rooms and bathrooms. That is, one successful project was duplicated thousands of times, hence the target of a series of such houses, accurate copies of each other. This characteristic of residential panel houses can be interpreted in different ways: on the one hand, acquiring such an apartment, you will know exactly what you buy, because you are already familiar with it. On the other hand, the standard layout assumes a standard setting and design of the apartment.

Correctly selected door-guarantor of your home

But on this minus panel housing do not end, because the panels themselves have very low heat and sound insulation properties. Partially correct this flaw will help with the mind of a selected and high-quality entrance door. How not to be mistaken when buying

Criterias of choice

All models are different in its design and functional features, but regardless of the material from which the product is made, each entrance door must have the following qualities:

These principles are in one way or another combined in all models of entrance doors, which ideally should be two. Let us consider in more detail the functional characteristics of each.

High-quality and stylish steel doors

First door

Today, the entrance door of the metal is the most reliable option for the apartment. It has a solid door frame from a profiled pipe or a metal corner, and also features powerful loops that are designed to hold heavy canvas.

Metal door sheet thickness is 1.2-2 millimeters. The basis of the structure of such a door is robbing rigidity - they significantly increase strength. When buying, you should ask the fastening of different parts of the metal door, the best - through, which pass through the entire door frame.

Among other things, metal doors are divided by chalme protection for 13 species. Standard door For an apartment apartment has 4 class.

In its purpose, the doors are distinguished by technical, household and front. The first is usually installed in Tambura, entrances, basements and are intended for non-standard weather conditions. Doors Parade belong to the highest price segment, since, most often their design includes two canvases, exclusive key systems and the most expensive finish. For the most part, such doors are installed in country houses and cottages. For panel houses, household doors are most suitable. They have affordable price and provide sufficient protection due to the variety of mounted locking systems. If you wish to a domestic metal door, you can cut an additional lock, and if there are some skills, you don't even have to call the wizard.

Farmland entrance doors For luxury housing

There are many options for finishing a metal door. The most budget - vinylipcite. It is a high-strength material with a PVC coating and an embossed pattern. Vinyliproke perfectly suitable for panel houseBecause the doors of apartment buildings are not subject to climatic exposure. The most common finishing option is powder spraying. It is not afraid of mechanical damage and can almost be corrosion. The next price is finished from MDF, which successfully simulates solid-mass wood and looks very exquisite. Door model, trimmed MDFs are distinguished by a variety of natural shades and textures, which is also an additional advantage. The most expensive and stylish, of course, the finish from a natural tree is considered, although it is not different from MDF.

Second door

Often, when choosing an input door, a whole set of one design is ordered. Many believe that the double entrance door is an excess, but it is not. In fact, the installation of the second door is a practical and advantageous solution for a variety of reasons.

Creates an air layer that completely isolates the dwelling from any outdoor noise. The same space prevents the loss of heat and penetration of foreign smells from the outside.

An important plus is an internal design that can be completely withstanding with the input door. Exterior finish May have two options - either the door idle repeats the design of the first, metal, or it complements the overall design of the apartment.

The latter is most preferable, since the second entrance door can be from the same model range as interior doors, which will ensure the integrity of the internal design.

As well as the second wooden door Provides additional protection and a barrier on the path of intruders, because one thing is to hack the first, and the other is to cope with two entrance doors.

Wooden entrance door

It is best to buy double doors complete, because ordering a design of two doors with a single block, you exclude the possibility of errors in the installation. In addition, with a common doorway, the slopes between the doors are immediately closed by good or box, which eliminates the need to finish them in the future.

Installation of the second door is practically no different from the installation of the first, but here also have its own features:

1. The second entrance door should be attached from the same side as the first and at the same time to open an apartment
2. The minimum distance between the two doors is determined by the size of the fittings. Simply put, door handles should not touch the closed form. At the same time, the air layer should not be too big, otherwise the weight loss will increase.
3. By itself, the second threshold is not a very convenient element of the input group. On the other hand, it is very practical, since the inner threshold is an additional obstacle to dirt and dust in the apartment.

The second door lock is not obliged to be supervised, but it is desirable that in its mechanism it differs from the outdoor castle. In addition, for more security, the inner door is complemented by an ordinary valve, and the peephole is an element for such a door completely extra.

Choosing a lock no less important question than the choice of doors

You can summarize that the best combination for the panel house is the first metal door + inner door, trimmed under the design of the interroom door. Thus, following the general principles of choosing and installing the entrance door, you can equip the ideal input group that will provide sufficient heat and sound insulation and will decorate your home.

Doors can be different, interroom or inlet, wooden or metal, simple and equipped different additional automatic systems. And in each case, the installation of the doors of the corresponding complexity should be performed.

Door manufacturers are usually engaged in installing doors independently, providing a guarantee for the work performed, and, of course, take a certain fee for this.

Naturally, the installation of the door implies the involvement of the team of professionals, but at the same time, work can be performed independently. Knowing installation rules interior doors, and the nuances of the metal door mounting, the entire procedure can be performed together for 3-4 hours.

For those who choose the last option, consider how to install the inlet metal door with your own hands.

Nuance. As a rule, the manufacturer does not provide a warranty on the door, which is established by third parties, and also does not perform its adjustment.

Installation of input metal doors - instructions

1. Preparatory stage

Door installation tool

Required tools set tools are presented in the photo.

As we see, the need for a particularly highly specialized professional tool does not occur.

Preparation of doors to installation

Preparation of the acquired door will also not take much time. It must be unpacked, verify the completeness. Check how the lock works and make sure the loops can be adjusted. To date, only mounted wood-welded hinges are unregulated.

Council. If the door does not have a protective film, it is recommended to protect it with a polyethylene film, and stick to the door frame.

Preparation of the place to install doors

The preparation of the installation site involves removing furniture from the place of work, removal of flooring or its protection, fixing the plinth, protection against dust design elements. In addition, it is necessary to immediately decide which way the door should open and take into account the required amount of the gap. To further flooring did not hinder the work of the door.

2. Disassembling the old entrance door

For the new building, this stage is not relevant, but when replacing the entrance iron doors in an apartment or a private house to it, it is worth considering.

The dismantling of the metal door takes no more than an hour and is divided into two components:

• dismantling of the door canvase. If the door is installed on unsaturable loops, it can be removed by opening it and pulling up. The door will easily slip with the loops. Given the weight of the metal door, you may need a lombing. If the hinges are collapsible, then they need to be disassembled using a screwdriver;

• dismantling of the door frame (metal or wooden). It is found that the door frame under the metal door is wooden, then you need to unscrew the entire anchor and remove individual parts from the doorway. Perhaps you have to cut wood into parts and remove them with scrap. Most often, the entrance door is installed in a metal box. Then you need to cut fixing rods and take out the box. And then eliminate all surface irregularities, remove unnecessary plaster and remove dust.

3. Preparation of the doorway for the entrance door

This stage is also different from the installation of interroom doors. And has several features:

• The inlet metal door cannot be trimmed. Typically, the door canvas are sold in standard sizes in increments of 100 mm. Naturally, it cannot be trimmed without violating integrity and external view. Consequently, to install the door you need to change the parameters of the opening. Standard width Door opening of the entrance door (metallic) 86-96 cm (on fire safety standards). In such an opening, it is convenient to put furniture, household appliances into the house, etc. As a rule, most of the input doors produced have such a width, so you can simply pick up the door.

To reduce the opening, you can install a metal frame from a chapeller or square. The scheme of installing the inlet metal door into a wide opening is shown in the figure.

The disadvantage of this method is the appearance of cold bridges. They can be eliminated by the arrangement and insulation of slopes.

To expand the opening, you need to cut part of the wall. For this use Bulgarian. In the house, cast from concrete, accomplish this work is much more difficult. Therefore, it is better to calculate the required width before purchasing the door canvase.

Council. Do not use shock methods to expand the opening, it can lead to cracking carrier design building.

• The entrance metal door is heavier. The optimal thickness of the metal for the input door is considered 2-3 mm. Thin slim sheet can be cut by shirts. So, it can be installed not in any opening. For example, a wall of a brick house or house built from hollow blocks does not have sufficient strength to withstand the weight of the metal door. In this case, a monolithic portal of concrete for the front door is cast, which is binding to the reinforcement with the wall. And already mounted the door frame.

• The thickness of the door box exceeds the thickness of the wall. According to GOST 31173-2003 "Blocks of the steel" box can not be installed in the wall, the thickness of which is less than 150 mm. In this case, you need to think about the thickening of the wall.

• Increases the load on the floor. To do this, the floor coating strength is checked in the doorway. If you have previously used a wooden bar or brick better, it is better to remove them, but the place to clean and pour concrete. For a easier door, you can lay a new brick or antiseptic-processed timber timber from durable wood.

At the same stage, communications are arranged. For example, lighting, doorbell, etc.

4. Installation of the door block in the opening

There are several ways to install the door block with your own hands.

Technology installation of door blocks - schemes are presented in the figure.

The choice of a specific option depends on the features and weight of the entrance door. For understanding briefly describe every method.

Method 1 - installation of the door block using mounting plates (lylish)

Schemes 1-3 in the picture. The most popular of installation methods, because Many manufacturers and shrubs make door boxes with speakers. Usually they are three on each side rack. The box is installed so that the plates be sealed to the outer part of the wall. And the technological gap between the door frame and the wall was 10-20 mm.

A hole is drilled in the wall. Its depth depends on the thickness of the wall and should be 2/3, but not less than 100 mm. Next, an anchor or sanitary bolts, which are tightened by keys through the hole in the eye of the eye. Quite often in the eye of the armature. The thickness of the rod is 12-15 mm sufficient.

Council. With hollow walls, the anchor bolts are not used, and the pin length should be increased to 500 mm.

For reliable mounting pin splashing (so as for a hat) or welded to the eye.

Council. To make it easier to start the reinforcement pin, you can sharpen one end.

The installation scheme through the eyeles is presented in the photo.

Council. Installing the door is better orienting the eyes inside the room. This will allow you to protect yourself from cutting the door.

Method 2 - installation of the door block through the door frame (box)

Scheme 4 in the figure above or drawing in the figure below.

Used in the event that the door is installed in the opening with the internal and external slopes. In this case, the wall thickness should be at least 150 mm to avoid its internal damage.

To install the door block in this manner through the mounting holes in the metal door, the holes depth 100-150 mm are dried. They start an anchor bolt and is delayed with the key or fittings start. If the holes in the door are not provided, they drill the drill. The magnitude of the technological gap between the wall and the door frame is 5-10 mm.

Council. By installing the door thus take care of the protection of the door coating. Powder spraying can be painted, and the polymer is not amenable to recovery.

Diagram of installing the door block through the box (door frame) is presented in the photo.

Method 3 - installation of the door block by concreting the door frame

The newest of the existing, but already found its supporters. Provides the concreting of the door frame, as shown in the diagram.

The essence of the method is that a hollow door frame is used, into which concrete solution is placed.

The installed box is leveled using a level, smoking (fixed) in the wall using anchors and is left to complete solutions.

Installation of the input metal door - Rules

The selection of this or that method does not mean that the metal entrance door will be installed correctly. When making installation, you need to adhere to the following sequence of work with the mandatory use of a construction level or a plumb.

• measure the width of the door in three places (top, bottom, middle);

• install the door frame strictly by level. This will avoid distortion in the future. Initially fix the door at the wall using wedges. This will help simply and timely adjust its position. In this case, the wedges are encouraged to be located as close as possible to the corners not to damage the coating of the box;

Council. The vertical needs to be checked outside and from the inside of the box.

• drill holes in the wall. The sizes of the holes must correspond to the size of the fasteners;

• start in the holes of the pins or bolts and securely secure them;

• provide a dense adjoining of the threshold to the floor. After all, it will have the greatest load;

• install door loops, lubricate them, remove unnecessary (excess) lubricant.

5. Holding the inlet metal door

The door must be installed with the necessary gaps. The magnitude of the door gaps in the door frame is constant throughout the perimeter. This is allowed to ensure the normal functioning of all locking mechanisms and loops.

After the door is installed, the ease of its opening is checked and the loops are adjustable. We will tell how to make it right.

How to adjust the loops on the entrance door

To adjust the door loops, you need to release all the fasteners on the middle loop, and on the bottom and top one to leave the tightened one.

If the size of the gap exceeds the norm from above, then you need to loosen fasteners on the bottom loop. As soon as the door can be installed correctly, you need to fix a relaxed screw on the upper loop, and then the remaining screws on the bottom loop. After that, screws are fixed on the upper loop and last on the middle.

Council. Check the installation quality of the input door can be as follows. On the threshold or rack put a sheet of paper and close the door. Pull the sheet. He must be pulled out with some effort.

6. Filling of the foam of technological gaps

Before you begin to fill the foam slots between the door frame and the wall, many professionals advise you to remove the door cloth to prevent foam on it. However, the masters advise to close it with a film and blend openings with a closed door. This will allow not overdoing with foam, which can even inflate a metal box.

Council. With a significant amount of gaps between the wall and the box, it is better to close them with foam, and only then to fit.

During the day, the foam will finally freeze and it will be possible to cut it. If wooden wedges will perform them, it is recommended to cut and do not score in any case. This can lead to deformation of the door frame, which is eliminated only by performing work again.

Council. The threshold should not be blown by foam. It collapses from constant loads. It is better to close the base and slit concrete.

Installation of input metal doors - Video instruction

7. Decorative design of the input metal door and opening

Includes design (decoration) of slopes, fastening of platbands, installation of the closer on the door, etc.

8. Care of the entrance metal door

Right installed door Metal does not need care, lubrication. Therefore, the entire departure is reduced to neat operation and care of the door cloth from the inside:

• with powder color, aggressive detergents can be used;

• when finishing vinyl skin and mDF panels, it is better to use a wet fabric without chemicals;

• when decorating laminate, you can use any kind of care, the main thing to wipe the door to dryness;

• when using a veneer in the door finish, it is better to use special poly rays for cleaning;

• to clean the handles and locks use a soft cloth, and the movable part of the castle is periodically lubricated with technical vaseline.

Conclusion

This instruction contains all nuances for installing an inlet metal door. Adhering to the presented recommendations to everyone will be able to fulfill correct installation Iron door do it yourself.

Installation metal doors It has many nuances, considering that only experienced specialists will be able. To date, you can find a lot of different information about the types of steel doors, and. Of course, for the consumer, all this is very important, but do not forget that no superlores will serve as it should, if errors are allowed when installing them.

Your actions at the order decor

Be sure to pay attention to the specific characteristics of the door: weight, dimensions, design features. For example, sometimes before fixing the box, it is necessary to strengthen the doorway itself. This is especially important for brick wallsThe minimum thickness, which will require the installation of a metal frame. It should be pre-consolidated to concrete Plate Overlapping and walls, and only then take for mounting the entrance door. The need for these works before the order should designate a specialist coming to measurements.

At the same stage, you must warn the masters about possible changes in the room directly adjacent to the entrance door: lifting the floor, a tie device, other estimated repair work. Discuss the degree of hacking the selected entrance door with the measurer, consult about the castles, learn about the presence of anti-riglers and the effect of the curvature of the walls on the end result.

Control for installation doors

The most important error is to install the door frame with distortion. What can serve as the cause?

The first is the inattentive alignment of the box relative to the vertical and horizontal, in order to avoid you to use the level, preferably laser. The door should stand absolutely smoothly, even if the doorway itself does not differ in geometric accuracy.

The second is the poor cleaning of seats from irregularities and influx of the solution. They interfere with correctly set the design, which is especially dangerous for heavy armored verses requiring special reconciliation when installing. The slightest retreat from the level will sooner or later manifest itself, because the door is not installed on one and not for two years, but for decades.

Carefully attribute to the installation process if you live in a panel house. It's no secret that there are fittings in concrete walls, and often when drilling holes for anchor bolts, the installers fall into the places of its break. This is fraught with either insufficient depth of attachment, or chipped concrete chips, and this is a direct way to reduce the degree of protection of the entrance door. To eliminate this disadvantage, it is recommended to use metal thrust, allowing the ability to shift the drilling point further deep into the concrete. Depending on the length of the metal traction, you can choose any removal of fastening from the edge of the wall.

Check the quality of work performed

The door should close easily enough even if there is a seal and press the handle with a controlled handle. Closing the door, you should not hear the sound of friction of riglee about the door frame. Easy backlash appearing when you press the handle with a closed door, testifies proper installation - Rigels move freely, that is, they are not clinically not clinically. The slots between the walls and the door frame can only remain if their cause is the curvature of the opening, and not a violation of the geometry in the manufacture of the structure.

Check out the locks several times - the ease of their opening and closing to all stated revs talks about the good quality of their installation. And finally, look at the eyes - if he gives the angle of the review, which is registered in the documents, can safely sign the act of work performed and say goodbye to the installers. And do not forget to take a warranty card!

We recommend that you do not engage in self. Whatever the master-gold hands you are, making the installation of a heavy design alone will be difficult, practically impossible task. In addition, the installation technology, depending on the manufacturer, may vary - even a very small error can lead to a rapid output of mechanisms. It is best to order installation by the manufacturer: Specialists, in contrast to single shores, have already thoroughly studied all the features of this particular design, which guarantees you high quality installation, long service life and free warranty repair in case of problems.

Repairs are a very complex and time-consuming process, which involves a large number of both physical and moral costs. For a modern person, the concept of repair includes not only long-term operation and quality of work performed, but also its moral satisfaction, i.e. Designer idea and modern stylization. In order to start and quickly finish repairs, you need to understand the whole process and follow a certain action algorithm. The first stage has always been and remains
When choosing an entrance door, you should always pay attention not only to design, but also for its functionality. The entrance door must work as a kind of shield for a person to secure him from "unwanted guests" - apartment thieves. First of all, of course, you need to pay attention to the locking wells, its elements (latches, peculiar necks and their placement) and reliability of their protection. Of course, the entrance door must be well insulated and made of high-quality material. To order the entrance door, you need to know the technical point, namely the size of the entrance door. That's where the most interesting begins.

Consider typical series of residential buildings.

By temporary sign, you can distinguish them as:

• Stalin's houses that were built in the 1950s. They are characterized by high ceilings, big halls and very spacious rooms;
• Khrushchev houses built from 1956 and 1964. Constructed from both bricks and from blocks. The big minus was that they had very small kitchens and there was no elevator. Also the bathroom was combined.
• Brezhnev houses were built, starting in 1965 and ending in 1980. They had more successful layouts, the number of floors increased to 9, and then to 17. They had very high popularity, both then and to date;

Modern construction of houses began since 1990 and to date. Every year, projects for the construction of residential multi-storey houses will be enhanced and become more comfortable for housing. The floors of the houses increase from 17 floors to 25. Basically, the "new buildings" are built on, where the old, emergency five-story buildings are demolished, outside the Moscow Ring Road, and build whole quarters of the so-called residential quarters. We will consider typical series modern housesAnd what entrance doors in Moscow you need to order for them.

The most popular on development are residential high-rise buildings of such series:

Series of houses P-3M.

These residential buildings were greatly popular, both in Moscow and in the Moscow region. The apartments of the houses of this series use modern methods of noise insulation, rounded balconies and erkers have been added.

At home P-3M series are built from the panels and have overlaps from reinforced concrete plates. Each entrance has a passenger elevator with a carrying capacity of 350 kg and a cargo lift with a carrying capacity of up to 500 kg.

The size door Piece In the houses of the P-3M series - width 90.0 cm, length - 207.0 cm.That is, in such openings you can install entrance doors with mounting dimensions 86-88 cm width, and 205 cm - height;

Series of houses P-44T

This type of houses is the most popular series of residential complexes. Features are noted by increased thermal insulation of walls, loggias that are glazed and the fact that the house is separated from the house under the red brick.

The walls of the houses of this series are made of panels with a brick finish. The entrances are equipped with elevators: passenger with a carrying capacity of 400 kg and cargo, with a carrying capacity of up to 630 kg.

The size of the doorway in the houses of the P-44T series - the width of 80.0 cm and the height of 200.0 cm. Such openings are definitely expanding on the sides and from above, because The standard mounting dimensions of the entrance doors under such opening are not manufactured.

After expanding the doorway, you can install the entrance door of any standard size: 86-98 cm in width and 205 cm in height.

Series of houses P-111M

These are panel houses of modern buildings, which were designed back in 1990 by order of the Ministry of Defense and began to actively construct since 1996 and to date. The most important thing is that these houses are not subject to demolition.

Dimensions of doorways in the houses of the P-111m series:

• width - 90.0 cm, height - 210.0 cm.
• width - 100.0 cm, height - 210.0 cm.

Door openings in these houses are universal, so they can install the front door of any standard size: 86 - 96 cm in width and 205 cm in height.

Series of houses P-55M

These houses were built only thirty buildings and all in Moscow. They became famous for their noise-protective panels. Construction went starting from 1997 to 2008. When designing, an emphasis was emphasized that all windows of the bedrooms of these houses were required to go into the courtyard, and the windows of the kitchens and staircases, on the roadway.

The size of the doorway in houses P-55m: width - 90.0 cm, height - 207.0 cm;

In such an opening, you can install the input door of the standard size: 86 cm wide and 205 cm high.

Copet Tower House Series (Candle)

This is a series of houses that are built on the basis of only one entrance and have the technical structure of the skyscraper. This series began its development since 2008 and to this day is one of the most prestigious and popular. All loggia glazed in these houses. Significantly increased the area of \u200b\u200bthe kitchen, respectively, the area of \u200b\u200bthe apartment itself. Modern high-speed elevators are also used.

The dimensions of the doorways in the CE-Tower series houses are: 90.0 cm width and 207.0 cm height.

By such a size of the doorway, you can install the door with the mounting dimensions of 86 cm wide and 205 cm tall.

In any case, if you have doubts about the size of the doorway, it is better to call the insurgent masters, which will come and remove the size of absolutely free! Sometimes it is better to trust professionals))

Buying steel doorYou have the right to expect that it will be the reliable guard of your home. But if the design is not firmly fixed in the opening, strong metal can be useless. In this article we will tell about how to control the quality of the installation of the entrance door.

• 1 of 1.

On the picture:

Where should the door be opened?The Ministry of Emergency Situations forbids changing the direction of opening the door, if the evacuation conditions from neighboring apartments deteriorate. This means that the sash when opening should not blow up common corridors and block the door located nearby. In practice, it is quite difficult to implement, so it makes sense to discuss in advance the issue with neighbors and come to the agreement. Note that the opening directions are important for the convenience of using the door, but it practically does not affect bonus resistance (if we are talking about a high-quality door block).

In the photo: Turri factory C120 entrance door.

Important questions

Do I need to strengthen the wall? Internal bearing walls and partitions in the overwhelming majority of urban high-rise buildings are made of monolithic reinforced concrete. They are strong enough and do not require additional strengthening. If the partition is composed of bricks or blocks, the opening will be required to strengthen the double welded frame from the corner - it should be ordered with the door. The need to find out during the measurements preceding the order.

Is it necessary to expand the discount?The inlet metal door often requires the expansion of the opening during installation. In the homes of some common series, for example P44 the width of the doorway is less than 900 mm. Door box And the mounted gap will reduce its value by about 80-100 mm. As a result, the discovery will be very narrow and inconvenient: it will be difficult to carry furniture and large-sized equipment. In addition, it may be disturbed by SNIP 21-01-97 and the order of the Ministry of Emergency Situations No. 313, according to which the width of the overwhelming "in the light" should be at least 800 mm (so that the stretcher can be carried). The extension service is relatively inexpensive - 4-6 thousand rubles. But if the Wall is carrier, these works will have to pre-receive permission in the housing bodies.

• 1 of 1.

On the picture:

In Russia, there are traditionally input metal doors with dimensions (height and width) 200, 210 cm for 80, 85, 90. Before buying the door, correlate its dimensions with the door sampled (in the homes of different series the width of the opening can be different).

How to locate a box? There are several ways to install a box in the opening: a folding, flush with the surface of a wall or with a shift toward the room. The first is extremely unreliable. In addition, the installed folding inlet metal door is very badly isolating the sound. This method of installation is resorted only when the discovery of narrow, and it is impossible to expand it for any reason. Blowing the box is optimally optimally from the point of view of burglary, however, the method is lost the possibility of installing the second (internal) door and limits the opening angle of the sash. Therefore, most often the box is installed flush with the outer surface of the wall, thereby providing satisfactory resistance to hacking and ease of operation.

In the photo: Impronta Materia Materia Door.

How to fix the box? Bond mounting nodes to the wall play an important role in ensuring resistance to hacking. As a rule, the box is fixed with steel pins (not less than 6 pcs.). These pins must be located so that they cannot be littering from the wall or cut off with a baccoon. Therefore, it is possible to mount the box through the holes in the racks only when it is blown out in the opening. If not, then the so-called mounting ears are welded in advance - steel plates, allowing to shift the attachment nodes towards the room. The greatest strength of the connection with the wall provides a box concreting. But not any inlet metal door can be installed in this way. It is necessary that its box be made of a special profile (with an open circuit of the section).

Installing Door

Preparatory stage. By visiting the brigade of installers, it is necessary to prepare thoroughly. First of all, check if there are no closer and other communications near the wiring and other communications - they need to be removed or protected. If you change the door in an already renovated apartment and at the same time decided to expand the opening, then, first, order the cutting of the wall with a disk saw equipped with an industrial vacuum cleaner (or "wet" cutting). Secondly, thoroughly cover the furniture and floors and try to seal the doors in the living rooms: dirt and dust will still be abused.

We accept work.Signing the act of work acceptance is not empty formality. We have the right to express complaints, so they are simply obliged to make sure that the door is installed qualitatively. First of all, pay attention to the attachment nodes: welding locations should be cleaned with a grinder. Make sure that the finish is not damaged anywhere, and the locks work gently, without jail. Walls B. panel houses Far from ideal, so it is often that the feeling that the entrance metal door is installed unevenly. As a rule, this impression is wrong. And yet, it does not interfere with checking the position of the racks in two planes by level.

The final stage.Installations can be carried out by laminated panels (the cost of the service is 2.5-4 thousand rubles). However, if the repair is in full swing, you should not hurry with these works. It is better to wait for the purchase of interroom doors, to acquire additional good things and arrange all the outlook in a single style.